Skip to main content

Add to MetaMask

You can add the Syscoin Rollux networks to MetaMask using the table below. Welcome to Rollux!

Network
Rollux OPv1 Testnet

Install the MetaMask Extension from the Store#

Visit the browser extension marketplace and download the MetaMask extension.

img

Create a MetaMask Wallet or Import One#

We would suggest creating a new one if you haven’t done so.

img

Click import wallet if you have an existing wallet.

Set up your password and secret recovery phrase somewhere safe.

Manual Setup to connect to Syscoin Rollux networks#

Switch the connected blockchain by clicking on the tab saying Main Ethereum Network.

img

Scroll down until you find Custom RPC.

img

Enter the Syscoin Rollux settings as follows:

Rollux OPv1 Testnet Details#

The testnet uses test Rollux SYS (rSYS), which has no value and is used for testing code before deploying it on mainnet. There is no need to add this network if you don't want to test anything.

Once this information has been entered click Save.

You have now connected to Rollux OPv1 Testnet with your Metamask Wallet!

Transactions on Rollux OPv1 Testnet require Test RSYS which is used for gas.

How to get RSYS#

Test RSYS can be acquired by bridging TSYS (test SYS) to the Rollux network. Get some TSYS from the following faucet in order to use the bridge:

(if you need more TSYS than the faucet provides, please reach-out to your Syscoin contact(s) or ask in Discord)

Now you need to bridge your TSYS to Rollux where it will show up as RSYS at your same address.

To do this, you need to switch to the Syscoin Tanenbaum Testnet network in MetaMask.

If you need to add the Syscoin Tanenbaum Testnet to MetaMask, go here for instructions

Simply send TSYS to the following smart contract address on Tanenbaum: 0x35141FB96fbC6A8F9D5D239b5a6256F056634672

As soon as your transfer receives a confirmation on Tanenbaum, your RSYS will arrive at your same address on the Rollux network.

Now switch your network to Rollux OPv1 Testnet in MetaMask to see your RSYS balance and begin using the network.